I decided on POOF!

Yesterday I left the card somewhat undone with the decision of BOO! or POOF! to be made.I kept looking at the card and decided it hade to POOF!So I opened up the Silhouette Studio software and whet to my Library and instead of looking for sentiments already made I went to My Fonts. and chose LDI Free Spirit, clicked on the Window icon to get back to my worksheet and the text tool and typed in what I wanted.

Now with the word selected, click on un-group, The word now shows individual letters with individual selection boxes instead of one selection box. Click on the Selection tool  and, voila! you can move each individual letter just the way you want it.

When you have them placed just where you want them then weld them together.

I kept the exclamation point separate because of the fine lines of the ‘F’. As it was the little dot was too little and i lost it so I had to hand cut another dot for the exclamation point.

Almost Headless Horseman…

or a witch who’s spell went bad???? Couldn’t resist that comment ~ I love this design. The cardstock was covered with a page from an old book i sprayed with Tattered Angel’s Patina and Olive Vine then tore it into pieces as the card is 5 1/2 inches square and the paper was not. The center (being covered with the main design, is bare and I left the edges ragged.  The Sassy Cheryl digital stamp was printed on lovely “Pure Silk” watercolor paper which you can get here & here with water color crayons (Neocolor II)  I also embossed the image; had to put it on high quality setting but i finally got it to emboss. I think the air is too dry around here (4000 ft. el.).

And used a couple of Silhouette’s cutting files makes a rather cute card! And being short on black cardstock, i painted white cardstock black with a marker (they do come in so handy!). The sentiment could be ‘Poof!’ or ‘Boo!’.

Circle Heart Scalloped & Web Frame From Silhouette were used for the cutting files. I had to use the old software becasue , for some reason, I couldn't get the image to import into Silhouette Studio. I sized the image in the shape then sized the shape and image to 4.63 x 4.63, printed and emboseed then cut. I love this paper! It is on the expensive side but then watercolor paper of any good quility usually is. And though this is not watercolor paper that a watercolorist would use, it is absolutely wonerful for cardmaking! it comes in 2 wieghts and sizes (12x12 and 8 1/2x11 inches).

The Other Machine

I definitely won’t be trading my Silhouette for any other cutter on the market. I really love the ease of use that comes with this and the fact that I don’t have to buy a cartridge at a hefty $70.00, or more, a cartridge. But I do look around and check out other machines just to see what’s going on.

I did run across a write-up on the new Cricut Imagine and thought that my Cricut lovers would really like to know what differences there are between that on and the Expression so here is the link. (http://www.papercrafterscorner.com/papercrafters-corner/2010/10/cricut-imagine-review.html) I would definitely not buy until I read this article and knew what i would be getting into.
P.S. I have not disappeared off the face of the internet. I ran out of appropriate items for this time of the year and had to help my daughter out again so I am waiting till i can buy some more stuff.

Silhouette Studio

Found out a new neat trick…i have been playing around a little and have saved a couple of files. so I opened one up and, then because i couldn’t see what was in the other file (both named drawing?.studio) i drug the other file into the window and found that the whole file did not open but the shape was there in the already opened window, now along side the other first shape form the first file. Pretty Neat!

There are some really nice short cuts that I have run across so I thought I should share them in case someone has not yet figured them out. So open your software and go to Preferences under File Menu and change 1 setting under Advanced and go to Show Bezier Handles for and click the All Points. By default the Selected Points Only option is chosen. 

Now draw out a circle by holding the shift key (standard) Make it a good comfortable size for playing with. Now double click on the line and you will have your edit point tool. You will have to be careful while this tool is selected because anywhere on the line that you click will make another point. Really Nifty! To get rid of any points you don’t want you can right click on that point and choose delete from the right click menu.

Click on a point and one quarter section of the circle will have a heavy dark red line and the point you clicked on will be white.

Your point editing dialog box should be open on your right so click on the corner function. Nothing looks like it is happening yet but when you move the handles (upwards till it lands on the line of the circle) on the point you will notice that is is forming a right angle….

 

Do the same with the same point other handle…

Here is what that finished shape looks like…

Now make an oval and do the same steps and you will have the beginnings of another tear drop shape which at this moment look like a sunflower seed...

Those blue handles closest to the ones you just moved will need to be moved to make the shape more like a tear drop…

then you can change to the other selection tool and copy and paste rotate (by using the little green knob at the top of the shape) and you have an eyelet grouping.

To adjust you spacing you can turn on the grid dialog and go tot he (which is the last one along the top to the right; it looks like a grid) and change the divisions to 16 and click show grid. I’m sure guidelines and rulers are coming but at the moment this is all we have but you can line thing s up quite well…

Now i am not going to do a complete eyelet edge because this is just to familiarize you with the procedures and the wonderful way this program handles the design aspects. From here you can do your own! ;)  For now we will select the three shapes and make an edge around them by using the offset function which has grown some new attributes!! You have the offset window open yet? It’s right next to the Modify icon (the one with the m on it) and click on offset. If you get trigger happy on offset you will end up with several offset borders; you only need one. The default spacing for the offset shows up and is set at 0.250 inches. This is fine for what we want here but you can move the slider and watch it adjust as you move the slider. You can set it where you want for the next step.

Now double click on the offset line and notice the point  for shaping….you can go ahead and right-click/delete each point along the bottom edge till your edge is nice and flat.

Now you can click on comer and move the end bottom edge points out till you get your corner where you want it and adjust the handles till you get the shape just right…

From here you are on your own. The sky is the limit!

A Little of This and That

Was wondering if any one wanted an update on the crepe paper costumes? She has posted 2 more lovely ideas from the past.
Rosebud and Tulip
& Slipovers for older girls
That should at leat spark some interesting ideas, I hope?!

The Silhouette Software is a preliminary version I am so glad they let us have to use. While the program isn't finished i can do a heart from a circle (not a square and 2 circles)! and silly looking arrowhead shape just for the fun of it. Also did a flat sided circle.

Yesterday i spent downloading my library as it wasn't picking it up on my computer and Silhouette waid this would not count as one of my recoveries i am allowed. I was so glad about that and then spent the rest of the day organizing them.

Silhouette Studio is here

It’s here! the Silhouette Studio Software for the Silhouette machine. And it is spectacular. I have a few things to show you.

The first delightful surprise was the measurements as I drew out a square. To rotate you line your cursor up over the green dot to rotate freely or by visual means or use the circular arrow in the tool box along the top. And then i went looking for the way to change the measurement via the right click menu and it wasn't there. Have to get used to this…it is in the scale menu – the box that is greyed next to the rotate icon.

You do have to click apply, the program does not make the adjustment until you do.

the next neatest thing is that you can play with your squares and circles to make different shapes!!!

I did! After you have your shape you click on the edit points icon long the left side of the program an d click on the square, or circle, and play with the shape to your heart’s content! If you want the point on the tope left shape, you can click on the corner in the point editing menu and adjust the levers on the point till you get what you want.

The program does Weld, Intersect, Subtract and more. And the Offset function is dynamic (meaning it changes as you change the value in the Offset Distance box. So super neat!

Well I have to go and play now. See you later!

 

P.S. All silhouette owners had an email with the announcement of the new software. If you threw  yours out or something else happened to it, it is on the Silhouette site under software.

Crepe Paper Costumes!

This is from another blog that I just had to pass on today to you! Back in my childhood crepe paper was still an essential for decorating birthday parties and making paper flowers. My mother had a Dennison book on flower making but I never saw that she made any. When I got older I made some. They turned out so nice and almost life like (as far as paper goes) and i love the way you could shape crepe paper!

Anyway it is also great for making costumes!
 



grandmothersdollhouse.com/
 Have Fun!
Also...check out this video on how to make a striped background with Distress inks from Gina K and Stamp TV: http://vimeo.com/15172436
You will like it!

the Time is coming when…

We have been going through some severe trials and as i was going through the Bible to find certain verses fitting for comfort to my family, i was impressed by Our Father to also set forth this warning: We must not fall asleep! The devil, our adversary goes about like a roaring lion seeking whom he may devour.

I Thess 5:2-10

²For yourselves know perfectly that the day of the Lord so cometh as a thief in the night. ³For when they shall say, Peace and safety; then sudden destruction cometh upon them, as travail upon a woman with child; and they shall not escape. ⁴But ye, brethren, are not in darkness, that that day should overtake you as a thief. ⁵Ye are all the children of light, and the children of the day: we are not of the night, nor of darkness.Therefore let us not sleep, as do others; but let us watch and be sober. ⁷For they that sleep sleep in the night; and they that be drunken are drunken in the night. ⁸But let us, who are of the day, be sober, putting on the breastplate of faith and love; and for an helmet, the hope of salvation. ⁹For God hath not appointed us to wrath, but to obtain salvation by our Lord Jesus Christ, ¹⁰Who died for us, that, whether we wake or sleep, we should live together with him.

The devil is using every tick and staying/abiding in Jesus is our safety.

I love you all and do not want any to perish, so if you know of someone who might need this please pass it on.

Cropped Rock Wall cont.

I saw this nice little ‘journal’ I found at the Dollar Tree (favorite place to shop) and bought some and thought I could make some covers even though they looked nice already. So with that in mind I have yesterday’s project finish. I took off both covers and scanned the cover into my computer and cropped the image in Windows Photo gallery (the greatest for quick and easy fixes). From there I brought the .jpg file into Robo Master.

The actual size of this cover is 4 15/16 (4.94) inches tall and 5 inches wide, so this is what we make sure the cover size is, at least after we make all the holes and have them in their places. I didn’t make the .jpg any large, i just enlarge the view by pressing the ‘+’ key twice; this way the cover is large enough to move my ‘holes’, not to mention drawing out the circle and seeing where to place it.

Circles are drawn from the center in this program so you can see how good your are at finding center. when finished press the ‘–’ key on the keypad to reduce the size of the working view. Don’t get rid of the .jpg file, this will help in the placement of the  holes. after you have minimized the view the drag a selection around this and group the jpg and holes together.

 

Then you want to make a 6 inch square and center the .jpg in the center of this, group all together and line it up for cutting. You will want to add in your carrier mat if you haven’t done that yet. And now you can un-group this and make the lines of the 6 inch square another color and mark it for not cutting in the settings dialog box. The other choice you have is to fill this square with color and in the line settings click on ‘no line’ (way down at the bottom of the drop down list) so that it doesn’t cut; re-group for safety’s sake. This file can be saved and used for other covers of the same size.

Place your paper (mine is BG’s Green at Heart) on the mat lining it up like in my photo (the red cutting line along the left and bottom edges). You will have to tape the paper to the carrier mat at the corners and halfway on each side. Cut! You can make your liners and back cover the same way.

Now you are ready to cover the front. If you are not good at doing the corners, you can fold the corners in till they are at the right angle, crease then glue them in place. Fold the long edges and glue them.  I used a double sided tape runner to place a strip of tape just under the holes and press it into place before folding the corners and sides then used Mono Multi glue and let it dry a little before pressing into place. For gluing along the edge, run a line (light but not too light) of glue long the edge of the base and fold the paper over. This should spread enough glue to glue this edge down and trim your paper (while glue is drying) to just above the holes.  Using a wet glue like this also softens the paper a little to help it fold into place and i didn’t have to deal with any wrinkles.

Now i have another shape for you…

This is my background (cotton ball applied distress inks)  for the birthday party….

 

I hope that you can see the stamped details. I just thought it would be a little more interesting than seeing my hand painted version so i stamped them on a page from a book that had been crumpled and distress ink applied (vintage photo) then misted with water.

the table cloth is from a 12x12 sheet of BG Sugar Rush with painted details in off-white acrylic paint.

The plate of cookies and single cookie and cake were painted with distress ink

The grass is Silhouette file: border_woodland_grass_C00852_19210

Cropped Rock Wall

Another neat little feature of the Robo Master software is the clipping feature. And while it does require a little extra work you can still do something amazing! I did a rock wall for a Penny Black Stamp!

First you need to bring in you  jpg file to be clipped. I used Bearly Mine Paper (freebie) that i like really well and would look really cute as part of the backdrop behind the stamped images.

after re-sizing the image (which wasn’t necessary for this) you want to click on the icon of a paper with scissors. the click on the closed spline tool and make your selection of the wall…

I hope you can see the selection I made. If not click on the photo for a larger view. The next step is to click again on the scissors icon and you will notice the excess paper disappear though the selection handles are still there.

This is where the extra work comes in because you will have to re-draw the outline of the wall again. But before you do that you should move you clipped image down where you want it and you can see that i added in a little bit of grass. these i will leave as is and color with Distress ink. Now you need to get the closed spline tool and re-draw around the wall, exactly on the edge, so that you will have a cutting line. After you have done that press on the plus sign on your keypad to enlarge the screen, click on the Edit Point Tool and make sure your line lines up along the edge of your clipped picture. I didn’t like this wall so I had re-done it but this photo will give you the idea anyway.

Next you want to run this through the printer and there are a couple of things for you to check before you actually print. If you are using paper that is a different size from the 8 1/2 x 11 paper you will want to change the size of your Robo Master and Printer page to match. You also want to make sure you have borderless printing checked on the printer settings. After you are done with your printing make sure your paper is lined up where i taught you here on your carrier mat, and cut.

My wall was off by about 1/16th of an inch too high but it is still good. I will have to work on this, but then i didn’t have my paper the right size and i had to eyeball it. So, really i didn’t do too bad. I just keep forgetting to make sure my paper is the same size. I used Dick Blick’s drawing paper and this after cutting it to 8 1/2 inches wide, forgot to make the height of the paper 11 inches. This is because i generally don’t have to be so exact but when doing this kind of cutting I do have to be exact. I put the design down at the bottom of the cutting area and when printing, the paper rolls through the printer till it gets to that spot and prints. If your paper is 12 inches it prints right where it was told but you have extra paper at the bottom. I could have trimmed it then to 11 inches but i didn't think of it. Really Dumb!!! because i had to line it up to the carrier mat. And my grass turned ot fine; I even colored some of the grass on the back side so I could fold the points down.

Tomorrow the finished piece.

Polygon Tool

This may be a little useless tutorial because Silhouette has given a sneak peak on their new software and i don’t know if this tool will be available in the new program but it is such a useful little tool. I have a template that i want to convert to a cutting file and i could use the polyline tool but the polygon tool is even better for this.

I imported my .jpg scan of the template and I have not really goo line for tracing this file so I am going to use the polygon tool to trace around the perimeter. The first 2 clicks show only a straight line but when you mover you mouse you will notice it open into a closed shape. Just keep clicking the major points (this line does not curve).

If your template you are tracing is enlarged on the screen so that you cannot see the whole template at one time (as here)

and you  have to move the screen, just use your mouse wheel while still holding the tool and scroll the screen up to finish the tracing.

I got to the last point where the line lined up perfectly aligned with the first anchor point and double clicked to finish my closed shape. I only had to adjust a couple of points  (by using the edit point tool) and now i am ready to place my straight lines for scoring..

While drawing straight lines it is helpful to anchor at a further pint and move in on a line that to start where you left off on the last line you drew. Sorry my lines were drawn freehand paint brush and they are not very good but they give the general idea. After i finished laying in the score lines i selected them and grouped them then change the color and line properties.

The polygon tool is also great for doing the flaps on the boxes like the pencil box…

cut-ups

I have a shape for you today. These will make lovely little pieces for messages or sentiments and images.

I have been making this shape for years ever since I first bought CorelDraw! 5. That is a fun(!!!) program! And i would combine shapes to come up with other shapes and came up with quite a few.

  

flower (nested_flower_3d_C00365_21585) and text frame (under cutting files in right hand column) were cut on the Silhouette Flower was colored with glimmer mists Tiger Lily and Old Lace. The center is gold mini-micro beads. I cut 6 petal-layers all at different sizes as follows: 1.55x1.77, 1.50x1.72, 1.22x1.39, 1.01x1.15, 0.98x1.13, 0.81x0.93. That’s so you can make sure the flower is the right size for the card. If you are cutting for something else you might want a larger size.

Leaves were stamped on water color paper and painted with water colors then cut out by hand.

Top layer of DP (Scrapper Dashery - IF, 12x12 from frantic stamper) is 3 3/4 x 4 1/2”

Mat layer (Basic Grey’s Kioshi – Plum Blossom, 12x12 from frantic stamper) is 4 1/4 x 5 1/4

Card Base (Bazzill Winter Collection) is cut 11 x 4 1/2 front is 5 1/2 x 4 1/2”

Sentiment is my own (feel free to use) and handwritten. Vintage Photo Distress ink was used with Tim Holtz’s applicator for the mellowing of paper.

Miss Mousie

New stamps in at Paper Garden Projects include the cutest little mice called Cute Companions and designed by Jayne Nestorenko. This is just one set and she has several…some of which are Christmas and Winter designs. I received my order yesterday and I have Celebration Parade  and Wishing Line, both of which have cute little backgrounds and sentiments; they were too cute not to get. And in my order Cathy had packed a couple of paper samples and so I put them together to make….

a card with a gift tag.
The pansy is shaped and all was colored with Distress inks.
For those who need to know certain details the background (or skyline) was stamped on the ‘sky’, white cardstock, then painted, and the bottom of the skyline was stamped and trimmed on the ‘grass’. Also stamped partial image of Miss Mousie on the grass then placed the image (colored on white cardstock - Neenah) over that so the the whiskers and pebbles lined up with the rest.
The card base was cut after placing the basic pieces together (sky, skline and grass – 5 1/2 inches wide the cut at 3 inches wide for main image). Card base measures 3 w. x 8 t. then the edge was punched and the top placed on. Paper is from the Hearts Bloom Paper Kit at Paper Garden Projects.

To Romeo and others….

Life gets frustrating at times. I had a very bad time getting this file to weld properly! It’s just the pencil box from the last project but it took me forever to figure out how to get it to weld without losing proportions as it would not weld even though the line lined up!. I had to add a smidgen of width to the piece that would not weld and then it went together perfectly! What a pain! And i had to download a trial version of CorelDraw! x5 in order to get it at all because Robo Master only adds and does not subtract. Now Corel is offering Draw! at 179.00 if i buy it quick but i don’t have them money and i am crying!!! They have added some really good hints to show how thing are lining up and a spline tool for making curves that is really out of site. So here goes a tutorial…I just have to share it…

 

First 3 points are drawn as shown by the dotted line and the squares are where i clicked the mouse to anchor the points. These point are for shaping and the dotted guide line is where you can add or subtract points to get a curve more to your liking,

here i have added another 2 points and ended by double clicking on the last point.

Here I have added a couple of guide line for helping my shaping. the blue line had already been added and the red show the last line i added.

Now you click on the shape tool to start shaping

where the guidelines and the spline guidelines are intersecting I am going to double click to add 4 new points.

You can see the shaping now. the spline line itself has jumped into position according to where i place new points.

by double clicking on the lower middle point I released the spline from the guideline and it jumped to where you see it. For more precise shaping of the spline shape you are creating you can turn on the grid and make 1/8 inch square to move the shape to amore pleasing shape.

So fantastic. and this is a new tool from my version. They also have a new way of reshaping a square – you have to click on the shape tool (and your square looks like this (bigger handles or points))

 

and then find the little convert to curves symbol…

Then you square looks like this….

And then by moving the bottom 2 points you can com up with this….

The rest of the shape stays in place! I hope i didn’t bore you with this, but I am just so excited and wish I had the money to get the program. Now, to make up for al the boring details i have a zip file with .svg, .dxf, and .gsd files of the pencil box i cut the other day. The zip file also contains a .jpg for those who have to cut by hand.

Now that i have done this, I need to go get my first cup of coffee (it is now 9:43am here), which i usually have before i do this kind of thing and get ob to the next project.